Table of Contents
30-100 — Press Piece / Driving Sleeve
Known manufacturer(s): Matra
| Stock Numbers | |
|---|---|
| Matra | 30-100 |
| NATO Stock Number (NSN) | 5120-12-194-7010 |
The 30-100 press piece is used:
- in conjunction with VW 454 in the installation of an input shaft oil seal,
- in conjunction with 3061 — Press Piece to remove pinion shaft inner bearing race and shims from a rear differential housing,
- in conjunction with a block of wood to install an outer bearing on the rear differential pinion shaft.
For other tools, see this list of Iltis-related specialty tools.
Uses
Installation of Input Shaft Oil SealClick image to enlarge.
Removal of Pinion Shaft Inner Bearing Race and ShimsClick image to enlarge.
Installation of Outer Bearing on Pinion ShaftClick image to enlarge.