Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
| c-30-108-000_cf-005 [2026/04/08 01:11] – admin | c-30-108-000_cf-005 [2026/04/09 20:28] (current) – removed admin | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ==== C-30-108-000/ | ||
| - | ==== Modification Instruction ==== | ||
| - | ==== Priority C ==== | ||
| - | ====== Transmission Bell Housing Modification ====== | ||
| - | ===== Truck, Utility, Light, 4 x 4, Military Design, Iltis, Canadian Series ===== | ||
| - | Issued on Authority of the Chief of the Defence Staff\\ | ||
| - | Contact Officer: [[dnd_glossary# | ||
| - | [[dnd_glossary# | ||
| - | © 1987 DND Canada\\ | ||
| - | 1987-12-03\\ | ||
| - | |||
| - | === Purpose === | ||
| - | 1. The purpose of this modification is to provide a means of draining entrapped water or oil from the transmission bell housing and also to provide an inspection port into the bell housing.\\ | ||
| - | === When Modification Shall Be Embodied === | ||
| - | 2. Modification shall be embodied on receipt of this instruction.\\ | ||
| - | === Installations Affected === | ||
| - | 3. The installation affected is the transmission Bell Housing Assembly.\\ | ||
| - | === Equipment/ | ||
| - | 4. The equipment affected is all Trucks, Utility, Light, Iltis, Canadian series.\\ | ||
| - | === Training Aids Affected === | ||
| - | 5. NA.\\ | ||
| - | === By Whom Work Shall Be Performed === | ||
| - | 6. Work shall be performed by first line maintenance organizations. Unit without resources shall request second line maintenance services.\\ | ||
| - | === Resources Required === | ||
| - | 7. The following resources are required:\\ | ||
| - | a. Manpower - [[dnd_glossary# | ||
| - | b. Downtime - 0.5 hour. \\ | ||
| - | c. Materiel Required - The following item is required:\\ | ||
| - | |||
| - | ^ Item ^ Stock No. ^ Part ^ Description | ||
| - | | 1 | 5340-01-196-3066 | (3723687) | Plug, Rubber (Chrysler Corp.) | | 1 | | | ||
| - | |||
| - | d. Special Tools Required - NA. | ||
| - | === Materiel Rendered Surplus === | ||
| - | 8. NA.\\ | ||
| - | === Modification of Spare Items === | ||
| - | 9. All stock vehicles will be modified, by Base Maintenance Organizations, | ||
| - | === Modification Embodiment Procedures === | ||
| - | 10. To modify the transmission bell housing proceed as follows:\\ | ||
| - | a. On the underside of the transmission bell housing, draw a centreline along the bell housing centre web, see Figure 1.\\ | ||
| - | b. Measure and drill a 3/4 inch diameter hole in the right side of the bell housing, so the hole centre is 3-1/2 inches from the front edge of the bell housing and 2-1/2 inches from the centreline of the housing web, see Figure 1.\\ | ||
| - | c. Clean and smooth the drilled hole edge using a half round file.\\ | ||
| - | d. Install the new rubber plug securely into the drilled hole.\\ | ||
| - | === Weight, Balance and Stability Data === | ||
| - | 11. NA.\\ | ||
| - | === Recording Procedures === | ||
| - | 12. Mark out number 5 on the “Modification Record” plate.\\ | ||
| - | === Reporting Procedures === | ||
| - | 13. On completion, report on work order Form 1020 in accordance with [[C-04-025-001/ | ||
| - | === Functional Characteristics of Equipment Altered === | ||
| - | 14. NA.\\ | ||
| - | === Annotation to Applicable Technical Orders === | ||
| - | 15. NA.\\ | ||
| - | === Additional Information === | ||
| - | 16. NA.\\ | ||
| - | === References and Other Data === | ||
| - | 17. Background References - [[dnd_glossary# | ||
| - | |||
| - | |||
| - | Figure 1 Measuring and Drilling Drain Hole \\ | ||
| - | |||